Surface Dr
New member
Hi Guys, Great site you have here. I am obviously new here, do I will do a brief intro.. My name is Tom and I own a business maned Surface Dr. I do Stone restoration, Stainless steel repair, Wood Repair, and some industrial garage floor coatings.
I have a killer air brush set up for my smaller wood jobs. I do have a accuspray turbine system that I used to use for recoating tubs. Truth be told, I have never liked the thing with the turbine I have. This could be user error. I probably know a little more than enough to be dangerous. I am a quality tool junkie. I am mobile and do jobs on site at all times. I am looking for a killer HVLP turbine system that allows me the options of using a pot or external cup. I will be spraying everything from laquers, and water based multispec ("granite look" material) to alaphatic acrylics (mostly for garage floors). I have about a $1500 to $2000 budget. I am probably looking for the one gun and turbine system that will do it all and spray anything I want with the proper tips and caps. I am considering the Apollo 7500C Series HVLP Spray Gun with their Apollo Model 1050VR HVLP Turbine SystemAdvanced Machinery - Model 1050VR Five Stage Turbine System. They claim that it will do it all.
Are there any other systems or setups that you pros would recommend.
Do I need to spend this much to get a great set up?
Is this a great set up for what I am wanting?
Has anybody had any experience with these or heard about them?
I live in the mountains at 8000ft above sea level. low humidity.. Great spraying conditions..I think.
I need very low overspray.
Thanks in advance.
PS... I did take the time to read through about 7 pages in this section to see if I could find the answer to my question. sorry if I may have missed it.
I have a killer air brush set up for my smaller wood jobs. I do have a accuspray turbine system that I used to use for recoating tubs. Truth be told, I have never liked the thing with the turbine I have. This could be user error. I probably know a little more than enough to be dangerous. I am a quality tool junkie. I am mobile and do jobs on site at all times. I am looking for a killer HVLP turbine system that allows me the options of using a pot or external cup. I will be spraying everything from laquers, and water based multispec ("granite look" material) to alaphatic acrylics (mostly for garage floors). I have about a $1500 to $2000 budget. I am probably looking for the one gun and turbine system that will do it all and spray anything I want with the proper tips and caps. I am considering the Apollo 7500C Series HVLP Spray Gun with their Apollo Model 1050VR HVLP Turbine SystemAdvanced Machinery - Model 1050VR Five Stage Turbine System. They claim that it will do it all.
Are there any other systems or setups that you pros would recommend.
Do I need to spend this much to get a great set up?
Is this a great set up for what I am wanting?
Has anybody had any experience with these or heard about them?
I live in the mountains at 8000ft above sea level. low humidity.. Great spraying conditions..I think.
I need very low overspray.
Thanks in advance.
PS... I did take the time to read through about 7 pages in this section to see if I could find the answer to my question. sorry if I may have missed it.
Last edited: