trikypaint
New member
Sometimes, no matter how much you wipe or clean your panels before spraying, there seems to be renegade stains that show through the final coats of finish, or even contamination while you're spraying that seems to come from nowhere. One way of making sure that you have your substrate as clean as possible is to use a glass cleaner as a pre-cleaner before your final wax & grease remover steps. Just a simple "spray on-wipe off" will give you added cleaning action against organic contaminants like dirt and fingerprints that solvent wipes won't normally touch. an added benefit from this step is the elimination of static surface charges that will draw lint into your paint. Give it a try!