T
TAZ
Guest
Want real tight flames? Be sure and use 3M's 1/16" tape. On a car/trcuk, 1/8" will work fine.
Be sure and mask up the "ovals" as soon as you are done with flaming the parts. This will help keep the tape from "pulling".
I usually do the front fender completely, then the rear fender, then do the tank(s).
Enjoy!
Be sure and mask up the "ovals" as soon as you are done with flaming the parts. This will help keep the tape from "pulling".
I usually do the front fender completely, then the rear fender, then do the tank(s).
Enjoy!