Small Buffer?

[cjlucas78]

I need a smaller buffer to work in area with lots of curves, what do you suggest? here is what I am working on so you have an idea of the curves to buff around:

 

[JohnPSW]

Chicago Pneumatic makes a nice little 3" buffer kit

Here it is listed on an eBay store for right at $100 with shipping

http://item.express.ebay.com/Vehicl...20ToolsQQptdiZ2871QQddiZ1168QQcmdZExpressItem

 

[flamepain]

i have one of those .they do work real nice.

 

[stonie]

hi i agree the 3 inch buffer is great but a little slow if you are doing this to make money, i highly recomend a tool i have been using for about a year now which is a shinano 6 inch buff which i use a cut down 3m foam waffle pads, this is small enough to use one handed and still gets into fairly tight corners, but still large enough that it doesnt take hours to buff a tank....

 

[Brian Dee]

Buffer

you probably have one by this time. But I think this one would be perfect for what your doing. It's by dynabrade,and has a low cfm consumption. Hope this helps. Try looking at www.innate.com

 

['03 zx6r]

i bought these three inch pads from kustom shop. i use them on a drill and a air drill. seems to work fine. they hae yellow,black and wool pads