Be sure and get you a 'thick' pad. I feel these work better than the low profile pads.
These work better to get into tight areas along with working on curved surfaces.
<a target="_blank" href="http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5574949431&toolid=10001&campid=5336795009&customid=&icep_uq=6%22+DA+pad&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg">Some 6" DA pads here</a><img style="text-decoration:none;border:0;padding:0;margin:0;" src="http://rover.ebay.com/roverimp/1/711-53200-19255-0/1?ff3=9&pub=5574949431&toolid=10001&campid=5336795009&customid=&uq=6%22+DA+pad&mpt=[CACHEBUSTER]">
Also, one thing about your DA. If you are doing bodywork, you probably want to make sure you got a longer throw. These have an aggressive orbit and really cut into whatever you are sanding. If you have a short throw, these are the best sanders for finishing. You can always look up the part number and compare it to the other DAs that the mfg has to offer to see if which one you have. If you even care....lol
Either one can do the rough in and the finish sanding, but it's nice to have one for each. If you sanding bodywork with your DA and you have a shorter throw, it will take quite a bit longer to sand