Compare painted color to final color

[TAZ]

If you are painting a basecoat and you need to compare next to a painted part to see how close it is, once the basecoat is dry (normally about 2-4 minutes), you can pour some DX330 over it. This will give the basecoat enough "gloss" for you to compare the painted part next to the part you need to match.

 

[danvincent]

Thanks TAZ for sharing this Great read. I'll save this for future usage.

 

[Brian Dee]

just as Taz suggested to pour DX 330 over the base coat. I use this wax and grease remover all the time. For those of you that don't know, DX 330 is about the least aggressive of all of them. Good tip Taz.

 

[TAZ]

Thanks all!
I pretty much use that tip every day. Be sure and look at your test panel / match panel at all angles and different lighting conditions.

 

[Painterpalmsprings]

Thanks TAZ! its a nice information you have shared with us. I was really unaware of this. Next i'll remember your tips while painting. Thanks again.

 

[TAZ]

Thanks guys...glad to see you're putting it to good use!

:bigokay: